E n this kitchen had no room for a table, so it was necessary to put a folding table or find another solution. And this came with the following design: it is two-drawer modules attached to the wall, a ledge on these 20-centimeter background serves as a bar, turn the boxes serve as support for a folding table.
This got a shelf / bar, storage drawers, small things and everyday table comfortable enough for two or three people. In this case once you open the table measures 120x60 cm.
The first step is the construction of the drawers, the hardboard material is 16 m / m covered in melamine. Each is composed of two sides of 35x45 cm. 17x33.4cm three horizontal parts. and rear of the same material 17x45 cm. The structure is mounted with tubillones, glue and screws to make it really hard because it will bear the full weight of the furniture in addition to own use.
A detail when building the drawers as the module will be bolted to the wall we must anticipate that the box we do not trip over the heads of the screws, I have solved the side of the box leaving an inch lower that the gap remains, and the bottom of the drawers five cm. less than that of the drawer and in these areas have put the screws so to the wall and the mobile bracket (see first image).
Another thing to consider is the type of screw, I used metal studs for large loads of 10 m / m in diameter, three drawers, taking into account that the burden of this hardware is a few hundred kilos Screw on brick wall I think it will suffice.
Once constructed the modules are only subject to the wall, with care that are level and we want to give away to our table, in this case as it will be a table of 120 cm are placed on pedestals 116 cm so that it protrudes a little ledge and is flush with drawers, placing on the table with their teams folding and enjoy it with good food.
The result can be seen in the third image. Practical, comfortable and above all cheap.
can ask for more?
